Description features:Features and benefits:
Best charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V
Universal for any Ni-MH/Ni-Cd battery pack 7.2V - 12V (6-10 cell pack)
Fast charger with current switch to select either, 0.9A and 1.8A
Deliver full charge within 1-2 hours
Charging current 0.9A for battery packs with capacity from 1,100mAh -2,200mAh
For 2,000mAh pack, charging time is 1 hour
Charging current 1.8A for battery packs with capacity above 2,000mAh
For 3,000mAh pack, charging time is 1.5 hours
Smart charger: with automatic voltage detection
Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life
Red LED will be on during charging
Automatically charging ending with negative delta V
Worldwide usage with 120-240V AC
Safety protection fuse for over current, short circuit & reverse polarity protectionAccessories included:
1 standard Tamiya female connector and fuse house with the smart battery charger
1 connector adaptor from standard male Tamiya to mini female
1 set of clip adaptor with male Tamiya connector on one end
2 additional fusesSmart charger specification:
FOR 7.2V-12V Ni-MH/Ni-Cd battery pack 6-10pc battery
Input: AC100-240V
Output: 7.2-12V 0.9 or 1.8AOperation instruction:
Connect battery pack to output connector and plug AC power source
Make sure battery polarity is connected correctly (Red wire is positive)
Charger will detect battery voltage automatically; red LED will be on during chargingWhen battery is fully charged, current will reduce to trickle charging at 50mA, green LED will be on
Battery will be charged at 0.9A or 1.8A constant current
Approximate charging time is about 1.5hrs for 3,000mAh battery, 1hr for 1,800mAh batteryThe charger is designed for faster charging Ni-Cd and Ni-MH battery packs from 6 to 12V for RC car/air and air soft gun
Don't charge battery pack with voltage less than 7.2V or voltage bigger than 12V and capacity smaller than1,100mAh
Battery pack must be made by high drain current cell
Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by misusageCaution:
The charger is designed for indoor use only. Don't leave the charger unattended during charging
The charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods
Don't cover the charger when charging, ambient temperature shall not be more than
40oC
Don't touch the plug
Don't leave the batteries and chargers on wood surface or carpet
Cut off the power supply before connect or disconnect the charger with batteries
Don't try to disassemble the charger, High voltage inside, danger NiMH/NiCd Universal Battery Pack Charg