Red Dot Sight

Red Dot Sight

Inquire Now

description :

RDP-IV AUTO BRIGHTNESS RED DOT SIGHT
This tubeless design reflex lens aperture provides a wide field of view. Suitablefor rapid-firing or shooting of moving targets besides normal shooting.

Automatic red dot brightness adjustment offers the integrated control circuit adjuststhe brightness of the aiming dot to varying light levels in the surroundings.The brightness sensor on the front side of the sight senses the brightness intarget direction. When the target surroundings are dark, the red dot will be dimmer.When target surroundings are bright, the red dot will be brighter.

The red dot is firmly factory-adjusted parallax-free to 40 yards. This adjustmentensures the parallax-related aiming errors are minimized over a large distancerange.

This red dot does not contain a separate ON/OF switch. When the red dot sight iscovered, it is in the power-saving mode (off ). When the cover is removed, the reddot is turned on automatically.

INSTALLING BATTERY:
RDP-IV Tubeless Sight is powered by one 3V lithium battery ( CR2032 or equivalent).When your reticle grows dim or darker, you will need to replace the battery.The battery can be replaced without removing the RDP-IV. Simply pull the batterycompartment using your fingernail (or small tool) and remove the battery. Placea new battery (+side up ) on the battery compartment and push it back as it wasuntil you can hear a click sound. The RDP-IV does not require re-zeroing afterreplacement of the battery, whereas other sights need to be removed, re-zeroed,and remounted.

MOUNTING:
RDP-IV sight includes an integrated rail that fits standard and dovetailed bases.This is suitable for most of the application. Because of the unlimited eye-reliefwith the sight, you should keep at least three inches of clearance between theend of the sight and your eye when shooting. Set the rail onto the base so thatthe rail claw aligns with the crosscut grooves. Work the claw into the base untilthe cross-bolt seats into the groove. Securely tighten the locking screw withthe supplied allen wrench.

WINDAGE AND ELEVATION ADJUSTMENT:
Before you make any adjustment, make sure using the Allen key(provided in package) loosing two locking screw to void damage of merchandise. Using the Allen keyto adjust elevation adjustment screw and windage adjustment screw. Tighten two lockingscrew after finished adjustment.

Specification:1X25.4
Weight:50g
Dimension:62mmX38mmX30mm
Red dot size:4 MOA
Parallax Free:40 yards Red Dot Sight more