Super-Program OBD-3000U

Super-Program OBD-3000U

Inquire Now

description :

Uniscan-3 Now you do not need to have wide experience in electronic automobile diagnostics. It is just enough to know how engine works - Uniscan 3 will make all rest.
You can connect Uniscan 3 practically to any European car even if it is not present in the list of supported cars, the main thing that there was a supported vehicle controller (ECU). In this case you will get the base set of options for this ECU.
The base set Uniscan is equipped by a lot of adapters for connection to any types of sockets. Software and the printed multilanguage manual offers you the detailed description of process of connection.
Uniscan 3 will automatically determine model of the car, will receive codes of failures from automobile ECU and will decipher them in the human readable format.
Also the detailed description of actions for malfunction repair, and many additional options for active trouble diagnostics will be offered to you:
Check and management executive mechanisms
Adaptation
Clear service intervals
Activation of special operating modes of the controller (depending on model of the car)
Uniscan 3 allows to make wide spectre of dealer functions on many autos: coding ECU, adaptation, synchronization IMMO and ECU, set idle speed, registration and removal the chip-keys.
The Direct interface with ECU - you enter numerical commands for ECU and receive the digital answer from it, if in system Uniscan there is a decoding of the given code, you also receive human readable answer. We constantly expand a database, therefore is possibility to never get unknown error code.
One pressing the button you can erase error codes stored in ECU.
You can look and save for the subsequent reproduction up to 10 parameters in dynamics simultaneously. (an option for catching floating errors)
Also you can learn about probable errors which automobile ECU cannot catch. (the certain set of minor problems specifies presence of the latent problem which ECU does not catch directly)
We constantly work for perfection of system that you always had actual base of automobile systems.
You will earn more as will spend less time for service of one client, accordingly can pass a greater stream through your service.
Probably, your positive recommendations will lead new clients to us.
You will not pay additional money for a upgrade as we receive from you the valuable information in the form of new unknown dumps from new cars which are not represented in our base.
The OBDfactory hardware is constructed on Altera controller that allows to add new protocols for new ECU only executing an update file on a computer. The program will check up the current version of a microcode itself and if necessary will make reprogramming.
Also the universal Uniscan 3 hardware allows to use the additional software for:
1. Mileage correction on many cars.
2. To add and delete Immobilizer keys
3. To read out and write down EEPROM various automobile devices (for the subsequent analysis on PC)
4. To adaptation of the new equipment THE BASE COMPLETE SET CONTENTS:
1. Special Adapter
2. Main Cable
3. Scanner -> OBD II / EOBD cable
4. RS-232 cable + USB -> COM adapter
5. The complete set of connecting wires
6. UNISCAN Software CD
7. User`s guide Supported models:
Alfa Romeo, Audi, Autobianchi, BMW, Cadillac, Chevrolet, Chrysler, Citroen, Daewoo, Daihatsu, Daimler, Fiat, Ford, Honda, Hyundai, Innocenti, Isuzu, Jaguar, Jeep, KIA, Land Rover, Lancia, Lexus, Lotus, Mazda, Mercedes Benz, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Polonez, Porsche, Proton, Renault, Rover, Saab, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW.
Supported protocols: OBD II / EOBD (ISO 9141-2, ISO 14230-4 (KWP-2000), ISO 15765-4 (CAN), ISO 11519 (SAE J1850 VPW,PWM