Data Specialist PLUS (PC)

Data Specialist PLUS (PC)

Inquire Now

description :

it is the complete automotive engineer in itself.It can do all kind of modern car programming like odometer , radio , Immo and many other features at very afforable price. It is the most complete programming device for digital odometers, airbag modules, car radios, car immobilisers. It is a high-quality embedded system, which offers a maximum of flexibility and working comfort. Outstanding characteristics of the system are:
- The current odometer reading is decoded and indicated.
- Intuitive operability by full menu guidance.
- Color connection picture is on the screen whenever you need.
- All data can be edited, stored and loaded.
- The stored data can be transferred to a PC for archiving.
- EEPROM, EPROM and FLASH programming of MCU is supported.
- Updade from the internet (free for a year). Odometer/Airbag/Immo/Radio/Programmer
It is the most complete programming device for digital odometers, airbag
modules, car radios, car immobilisers. It is a high-quality embedded system, which offers a
maximum of flexibility and working comfort.
Outstanding characteristics of the system are:
- The current odometer reading is decoded and indicated.
- Intuitive operability by full menu guidance.
- Color connection picture is on the screen whenever you need.
- All data can be edited, stored and loaded.
- The stored data can be transferred to a PC for archiving.
- EEPROM, EPROM and FLASH programming of MCU is supported.
- Updade from the internet (free for a year).
AUTO-PALM
The Auto-Palm is an advanced PDA
system based on ARM 925 TDI.
Technical reference :
- S3C2410 32-bit processor,233MHz
- 64MB NandFlash,64MB SDRAM
- 320?40 TFT LCD and touch screen
- 1 USB HOST
- 1 USB DEVICE
- SD card interface
- RTC(lithium battery)
- URT interface
MAIN HARDWARE
The main hardware is a high-speed
MCU-controlled data processing unit, it
can communicate with the Auto-Palm
and the operating target.
DB9-female is used to connect the main
hardware to the Auto-Palm.
DB9-male is used to connect the
main hardware to the target OBD
socket.
Adapter-Connector is used to connect
the main hardware to the target adapter.
Led-Indicators are used to indicate the
operating state of the main hardware,
while the red led indicates ?ower on?
the green led indicates ?usy? and the
yellow led indicates ?rror?
Power-Connector is used to supply 12VDC
to the system.
USB-PORT is for later use.
ODOMETER ADJUSTMENT
Click the ?DOMETER?button on the main
window (Figure 1), you will see the window
as Figure 3, choose ?dapter?or ?BD? click
?K?button, you will see the make list
window (Figure 4), select make such as
?OLVO?and double click, mode list window
appears as Figure 5, double click on a
model such as ?80 112PIN 3K91D? you will
see the help window as Figure 6, click
?onnect Picture? you can see a color
picture which show you how to connect a
proper adapter to the target odometer pcb
(Figure 7), you can zoom out or zoom in the
picture so that Figure 1
you can see it more clearly (Figure 8);
after connecting the adapter and the target
odometer pcb correctly, you can plug the
adapter into the Adapter-Connector of the
main hardware (Cautions: On the Adapter-
Connector of main hardware and each
Adapters, there is a little white arrow, plug
the Adapter to the main hardware along the
arrow side, and arrow direction is face to
face), then click ?K?button, the odometer
adjustment window appears as Figure 9, in
this window you can read current km by
?ead KM?button, backup data by ?ackup?
button, and recover your backuped data to
the target odometer by ?ecovery?button.
Before making adjustment you should
backup data first, click ?ackup?button, the
current data of the odometer is automatically
saved to the ?esidentFlash/ userdata?
directory. After you backup data, a new
window with ?rite KM?button appears
(Figure 2), click ?rite KM?button and input
a new km in Figure 3, then click ?K?button
and wait a moment the adjustment operation
is finished.
Notes:
l BSI unit adjusting. Before
adjusting some odometers,
you have to reset BSI unit
first, such as ?eugeot 307?
you should select ?SI?and
reset the km to zero, then
adjust the km of odometer.
See Figures. LCM/ EWS/ CAS unit adjusting.
Before adjusting some BMW
odometers you have to reset the km
in LCM/ EWS/ CAS unit first, this
operation is similar to odometer
adjustment. See Pictures OBD and Adapter selection, some cars have
two adjustment methods, one is by OBD
connector, the other is by Adapter. You should
choose OBD method firstly, because this
method is more convenient and safe than the
other. AIRBAG RESET
Click the ?IRBAG?button on the main window, you will see the airbag reset window,
select make and model, then repair (Figure 17). In OBD operation you can do crash data
clear and data mistake repair. See Figure 18
Figure 18 Figure 19
IMMO CODE READER
Click the ?MMO?button on the main window, you will see the immo code reading window,
select make and model, then read immo code. See Figure 19.
Notes:
Some IMMO code can be read by odometer adjustment OBD operations. See Figure 19.
Some IMMO can not be read, what you can only do is to disable the immo funtion by
writing eeprom of engine ECU. See Figure 20.
Figure 20 Figure 21
RADIO CODE READER
Click the ?ADIO?button on the main window, you can see the airbag reset window,
select make and model, then read radio code. See Figure 21
PROGRAMMER
The programmer function of Dataspecialist is powerful, you can use it to do what you
want. Click the ?ROG.?button on the main window, you will enter the programmer
window. Establish a new file or open an old file, select chip device, then you can fulfill all
the operations of ?dit? ?rase? ?ead? ?rite? ?opy? and ?ave? etc. See Figure 22 and
Figure 23.
Figure 22 Figure 23
ADAPTERS
Main Hardware & auto palm
EEPROM Adapter:
support EEPROM programming
of 25xx, 95xx, 24xx, 93xx,
M35080, TC97101, TC89101,
59C11, 16911G chips.
MOTOROLA Adapter:
support EEPROM, EPROM and
FLASH programming of
MC68HC(7)05,
MC68HC(7)11,
MC68HC(9)08
MC68HC(9)(S)12 series CPUs.
FLASH Adapter and
support programming of
27 series EPROM and
28 , 29 series FLASH memories
NEC Adapter:
support EEPROM programming
of
uPD78K0 series CPUs
TMS Adapter:
support EEPROM programming
of
TMS370 series CPUs.
NDM457-Adapter support the
following chips: NDM457C, 51006A
etc
HC08 Adapter:
support EEPROM and FLASH
programming of
MC68HC(9)08 series CPUs (with
security passed).
HC12 Adapter: support EEPROM
and FLASH programming of
MC68HC(9)(S)12 series CPUs
(with security passed),
ST62XX Adapter: support
EEPROM programming of
ST6245,
ST6249 chips .
EWS Adapter: support the
kilometer of BMW
E38/E39/E46/E53 EWS reading
and resetting.
VW-OBD Cable: for ordinary OBD
operations such as airbag modules
reset, odometer adjustment, IMMO
code reading.
BMW-OBD Cable: for ordinary
diagnosis operations such as BMW
LCM/EWS/CAS KM adjustment.
Merceses benz 38 pin diagnose cable .
BMW 20 pin diagnose cable
OBD2 Female
bag.
HC912 adapters
MC68HC912 QFP-112 adap