How to print photography by laser printer!

Description features:The installation of color laser printer is growing every year. More and more people use laser printer to print photography and disappoint in poor printing quality or paper jam. What is problem happening when using laser printer for photographic printing? Paper thickness and color saturation:
Basically, the color calibration of laser printer is based on common paper (80~100 gsm). If increasing photo paper thickness (for example, the paper of photographic development system is over 180 gsm), the color saturation will be reduced. How to avoid loss color saturation when increasing paper thickness? Printing speed:
Slow down printing speed can take more time for toner transfer and increasing color saturation. In the market, there are many different types of different printing speed such as 4~5 ppm (pages per minute), 16 ppm and over 20 ppm. Fortunately, printing speed is possible to be controlled by selection icon of paper material. Recommended speed is 106~160 gsm. Thermal stress:
Many people recommend glossy photo paper or premium paper for laser photographic printing. Be careful! The heating temperature of fuser can rise up to 200 degree C during printing. The potential risk of thermal stress is possible to melt-down the coating material of paper surface or crack happening. Particular, printing is operating at low speed. Thickness again! The thickness of those products is over 80~100 gsm. Paper polarity:
Another methodology is how to change physical characteristic of paper surface to improve toner transfer. Fortunately, toner is negative polarity of almost laser printers, it is possible to spray electrical positive charges on the paper surface and conduct more toner to paper surface to increase toner density and color saturation as well. Resolution:
Due to toner is dry powder in natural, the paper has no connection with resolution. The image resolution is decided by printer engine and printing language. 600 x 600 dpi can offer remarkable picture image quality. 1200 x 1200 and 2400 x 2400 dpi will increase more grades of gray level and improve better cubic effect. Glossy:
Keep in mind! Toner is dry powder. Whatever your paper is high glossy or brightness, the surface of photo paper is covered by toner after printing. If it can present glossy, that means the toner density is not enough and the color of printing quality is very light. Actually, toner embraces wax inside and it can offer brightness after printer. Moisture:
Moisture tends to make pulp fibre expansion, raising paper thickness and uneven roughness. Coating skill perhaps is one of solutions to isolate moisture in air. Apply synthetic paper to replace pulp paper is a good alternative to resist moisture completely. Testing:
The testing had done with HP CLJ 2550/2605/3700/4600/5500/9500/Indigo, EPSON Aculaser 900/1100/1900/3000/4000, Konica Minolta 2450, Xerox DC12 and 6060. Laser printing photo paper:
Type A4S-S001 is one of our product series, PP synthetic paper made, 153 gsm (weight), 0.22 mm (thickness), 106~163 gsm printing speed, with positive polarity, resist high temperature, meet environment protection, good hand touch feeling, without turn-yellowish for long term exposure in air or under halogen lighting, tear-proof, no releasing chemical or medicine smell, wet-proo